HPI-112468 - HPI RACING - MICRO RS4 RTR WITH 1969 FORD MUSTANG RTR-X BODY
The tiniest member of Vaughn Gittin Jr.'s garage is here, and it's the perfect pint-sized companion to the 1/10th scale replicas that HPI Racing offers! This Micro RS4 is a scaled-down, 1/18th scale version of Vaughn's iconic 1969 Ford Mustang RTR-X, which was designed by Vaughn in partnership with the Need For Speed crew! Vaughn is the only one who can drive the real thing, but if you want a replica that can fit in the palm of your hand, this is the only version you'll be able to find!
This 4WD 1/18th scale RC car is perfect for shredding tires inside and outside, with a high-powered motor driving all four wheels and coil-over shocks providing smooth power and excellent control. This Ready To Run Micro RS4 kit features a highly detailed and scale 1969 Ford Mustang RTR-X replica body for an awesome scale look wherever you drive! Just like the 1/10th scale replica, we even include TWO SETS of wheels and tires, one for drifting and one for racing!
The HPI Micro RS4 is powered by an HPI 180-size motor, electronic speed control, full time 4WD belt drive and waterproof steering servo. It's ready to drive or drift straight out of the box, just like Vaughn Gittin Jr.'s full-size Ford Mustang!
EASY TO DRIVE!
The Micro RS4 is super-easy to drive and get familiar with - all you have to do is install the batteries, plug it in and switch on the radio and car. It's that easy! To drive the car, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel - it's as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger - hold it there to go into reverse. It takes only seconds to get used to this easy operation, and in no time at all you'll be ripping off jaw-dropping moves, just like Vaughn Gitten Jr. in Formula Drift competitions!
REPLICA RTR-X WHEELS
This car features true-to-scale replica wheels, taken directly off Vaughn Gittin Jr.'s one-of-a-kind 1969 Ford Mustang RTR-X! These are exact replicas of the wheels used on Vaughn's full-size car, even down to the awesome two-tone metallic green color! TWO sets of wheels and tires are included with each kit, and it's super-easy to change between them. You get one full set of grippy race tires for all-out performance, and you get another set of high-performance drifting tires for sideways fun!
Pre-Built, Ready to Run 1/18th scale racing car
Officially licensed replica of Vaughn Gittin Jr.'s 1969 Ford Mustang RTR-X
Drives just like a larger RC car!
4WD for maximum control and speed
Belt drivetrain for efficient power transfer to front wheels
Double-wishbone independent front suspension
Coil-over inboard cantilever front shocks
Front universal dogbones
Front and rear differentials for maximum drivetrain efficiency
Fully equipped with ball bearings for maximum efficiency
EN-2 electronic speed control for total control
2.4GHz radio system for long range reception, no frequency crystals needed
180-size motor for fast speeds and quick acceleration
6v 1200mAh battery for long driving times and plenty of power
AC wall charger included for extra convenience
4 AA batteries included for transmitter
#112468 MICRO RS4 RTR WITH 1969 FORD MUSTANG RTR-X BODY
1/18th SCALE 4WD MICRO CAR with 2.4GHz RADIO
Tyre Diameter: 36mm
Drivetrain: Full-Time Belt 4WD