Special offers & Sale Items

view whats in your basket

Secure online payments

Safe Internet Delivery

AMC Logo

Frequently asked question & Customer Support


SMT-120 Slapmaster 1/10 CRC GenX10 WGT Scale Diff Thrust Bearing
SMT-120 Slapmaster  1/10 CRC GenX10 WGT   Scale Diff Thrust Bearing

SMT-120 Slapmaster  1/10 CRC GenX10 WGT   Scale Diff Thrust Bearing

The ongoing changing market continues to toss variables into selecting the correct Thrust Kit. Consider the chassis you are using, 1/8 vs 3/32 diff balls, and if you have replaced your kit with a non-factory axle. You can also measure from the diff hub bearing to the remaining portion of the 1/4 inch axle, add 0.020” or 0.5mm, then reference which thrust kit is needed. If you need help, please ask using the “Contact Brian” tab. Donʼt want to bother, check out the new “Fit it All” kit... all 3 sizes in 1 package!
  • Length 0.08-0.13” (2.0-3.3mm) use #101
  • Length 0.13-0.15” (3.3-3.8mm) use #120
  • Length 0.15-0.19” (3.8-4.8mm) use #109
This thrust bearing kit spans over the 1/4x3/8 hub bearing with a specially designed
delrin spacer removing itʼs side load, uses an actual thrust bearing which greatly
increases differential longevity. The rear tire can
easily be removed without any interference. A black
anodized aluminum lock nut is included.

Price: £18.99
Out of Stock

« Previous | Next »


Return to top of page

© 2006. All rights reserved. Protected by copyright law protection act.
Telephone : 01803 211007   Fax : 01803 292029   Email : sales@actionmodelcentre.com